Cincinnati Canstruction

posted in: News, Projects | 0

The Manufactory is proud support the Cincinnati Canstruction Design/Build Competition effort of PEDCO E & A Services, Inc. PEDCO’s team used The CNC router at The Manufactory to create the support bases for the project which consisted of nearly two … Continued

Zombie Turtles take show

posted in: News, Projects | 0

The Manufactory’s own Kyle Neidich, one of our instructors, along with Mitch, Nick and & Sach, took Third place in the Red Bull Soapbox 2015 Ohio race. The team built a very impressive and sturdy racer using the resources of … Continued

HVAC Duct

posted in: Projects | 0

Problem: The replacement heating and air conditioner unit for a boat that fits under one of the seats comes with a 6″ hose connection. The setup requires the use of two 4″ hoses. The company sells an adapter kit for … Continued

Art created for 3CDC’s new headquarters

posted in: News, Projects | 0

Jeff Welch, an accomplished Industrial, Architectural and Graphic Designer, has created a unique and beautiful piece of art for 3CDC’s new headquarters in Over-the-Rhine. The all aluminum design, creatively named the Aluminatti, was built at at The Manufactory. Originally conceived … Continued

Go Nuts!

posted in: News, Projects | 0

The Manufactory is proud to sponsor the Walnut Hills Highs School Nuts robotics team. If you visit The Manufactory and see a large group of bright looking young people huddled around a pizza and/or an intriguing looking cube shaped machine, … Continued

Building the Solar System

posted in: Projects | 0

One of our favorite members, Jennifer, with the guiding hands of her father, Bob, used the resources at The Manufactory to build a scale model of the solar system which is now on permanent display at her Alma Mater, Fairfield … Continued

Dave’s Dashboard

posted in: Projects | 0

Dave, a member/educator, is restoring his 1978 Jeep CJ7. He has already reworked the roll bar some of the fabrication tools including the tubing notcher, tubing bender and the welding equipment. Next on his list was the dashboard. Over the … Continued

Laser Engraver Upgrade

posted in: Projects | 0

Members have told us that one of the difficulties in using the laser engraver is determining exactly where the laser was going to engrave/cut. We did a little research and found that a lot of others that have machines without … Continued

Rose learns how to solder

posted in: Projects | 0

Rose, a teacher at Nagel Middle School, came in to take our first 3D printing class and got more than she bargained for! Rose was a volunteer at last fall’s Mini Maker Faire and likes to teach her students about … Continued

WP Facebook Auto Publish Powered By : XYZScripts.com