European Group Visits The Manufactory

posted in: News | 0

and taught me the importance of market access! by Lee Krieg On October 6th, 2015, I had the honor of hosting a group of nine visitors from Europe who came as part of The U.S. Department of State’s International Visitor … Continued

365Cincinnati

posted in: In the media, News | 0

Bridgett Raffenberg of 365Cincinnati published a nice article characterizing The Manufactory as “a Makerspace on steroids!” We wholeheartedly agree!  Read the article here.

Zombie Turtles take show

posted in: News, Projects | 0

The Manufactory’s own Kyle Neidich, one of our instructors, along with Mitch, Nick and & Sach, took Third place in the Red Bull Soapbox 2015 Ohio race. The team built a very impressive and sturdy racer using the resources of … Continued

Demo Day – Win a Free Year!

posted in: News | 0

Come to our Demo Day – Open House on September 26, 2015 and win a Free One Year Membership! a $1,200 value. A Demo Day an opportunity for us to show off. We will be running demonstrations on many of … Continued

Heat Treating Workshop

posted in: News | 0

Heat treating metals is a mystery until you understand it. Depending upon how much heat you apply and how you cool it, you get different results. Hardening, Annealing (softening) and tempering are all accomplished by applying heating and cooling in … Continued

Independence Day Schedule

posted in: News | 0

So that everyone can spend time with family and friends to celebrate our independence, The Manufactory will close at 6 pm July 3rd through July 5th. Enjoy the holiday weekend! We apologize for any inconvenience.

Angolan Visitors

posted in: News | 0

On June 4th, 2015, a group of 10 delegates from Mediateca Angola (site in Portuguese) and three interpreters visited The Manufactory. The U.S. Department of State’s International Visitor Leadership Program describes the group as “…a new, nationwide publicly financed nationwide … Continued

HVAC Duct

posted in: Projects | 0

Problem: The replacement heating and air conditioner unit for a boat that fits under one of the seats comes with a 6″ hose connection. The setup requires the use of two 4″ hoses. The company sells an adapter kit for … Continued

Continuous Improvement

posted in: News | 0

The management of The Manufactory has a philosophy of continuous improvement.  We strive every day to make every visit by a member better than their last. We do this through. Being member driven, you are our most important asset. Improving … Continued