Sneak Peek A Success

posted in: News | 0

Our first Sneak Peek, held on Saturday, November 23rd, was a big success. The attendees had an opportunity to view our makerspace and get their questions answered. There will be another one held on Wednesday, November 27th at 5:00. Yes, … Continued

Still openings available

posted in: News | 0

There is still room for you at both upcoming Sneak Peek events. If you want to see what The Manufactory is all about, this is your chance! Several people have asked, “I do not want to be an instructor, can … Continued

Sneak a Peek of The Manufactory

posted in: News | 0

We will be hosting 2 Sneak Peek events. The first will be held Saturday, November 23 at Noon. The second will be held Wednesday, November 27th at 5:00 pm. These events are targeted towards early adopters and people interested in: … Continued

MakerFaire Questions

posted in: News | 1

I will try to address some of the most asked questions at the MakerFaire. “When will you be open?”, was, without a doubt the number one question. This is not a simple question because we plan on opening in stages. … Continued

Cincinnati MakerFaire was FANTASTIC!

posted in: News | 0

Even though it was cold and rainy, a good crowd was at Cincinnati’s first MakerFaire. We saw a lot of very creative and interesting things made by a lot of creative and interesting people. Washington Park was full of flashing … Continued

See you at the MakerFaire!

posted in: News | 0

We look forward to seeing you at the MakerFaire, this Saturday, October 19th in Washington Park, Noon til 10 p.m. Admission is FREE! We will be there along with about 100 other exhibitors. It should be an awesome event, a … Continued

CNC Plasma Table is Here!

posted in: News | 0

The CNC Plasma Table has arrived and is set in place. It is a brand new unit built by Arclight Dynamics. It has a 4’x8′ bed with a water table and is equipped with a Hypertherm 85 plasma torch capable … Continued