The Manufactory

Sneak Peek A Success

Our first Sneak Peek, held on Saturday, November 23rd, was a big success. The attendees had an opportunity to view our makerspace and get their questions answered. There will be another one held on Wednesday, November 27th at 5:00. Yes, we know it is the biggest bar night of the year, but that doesn’t start […]

Continue Reading

Still openings available

There is still room for you at both upcoming Sneak Peek events. If you want to see what The Manufactory is all about, this is your chance! Several people have asked, “I do not want to be an instructor, can I still come?” The answer is YES!. This is open to anyone that is interested. […]

Continue Reading

Sneak a Peek of The Manufactory

We will be hosting 2 Sneak Peek events. The first will be held Saturday, November 23 at Noon. The second will be held Wednesday, November 27th at 5:00 pm. These events are targeted towards early adopters and people interested in: Becoming class instructors Employment opportunities Helping set things up The first hour will be an […]

Continue Reading

MakerFaire Questions

I will try to address some of the most asked questions at the MakerFaire. “When will you be open?”, was, without a doubt the number one question. This is not a simple question because we plan on opening in stages. We have never done this before so we want to make sure that we get […]

Continue Reading

Cincinnati MakerFaire was FANTASTIC!

Even though it was cold and rainy, a good crowd was at Cincinnati’s first MakerFaire. We saw a lot of very creative and interesting things made by a lot of creative and interesting people. Washington Park was full of flashing lights, flames shooting in the air, music, dancing, robots, food and lots of hot coffee! […]

Continue Reading

See you at the MakerFaire!

We look forward to seeing you at the MakerFaire, this Saturday, October 19th in Washington Park, Noon til 10 p.m. Admission is FREE! We will be there along with about 100 other exhibitors. It should be an awesome event, a lot unusual gadgets, gizmos and best of all, Power tool racing!. There will also be […]

Continue Reading

CNC Plasma Table is Here!

The CNC Plasma Table has arrived and is set in place. It is a brand new unit built by Arclight Dynamics. It has a 4’x8′ bed with a water table and is equipped with a Hypertherm 85 plasma torch capable of cutting 3/4″ steel plate. It has lots of extras such as torch height control […]

Continue Reading

Progress Report – The metal shop is nearing completion!

The construction and setup of the metal shop is almost finished. We are still waiting on a lathe and box & pan brake to arrive. A little more electrical work and we can call it done! The metal shop feature 2 basic areas, machining and fabricating. The machine shop has 4 lathes of various sizes, […]

Continue Reading

WP Facebook Auto Publish Powered By : XYZScripts.com