Building the Solar System

posted in: Projects | 0

One of our favorite members, Jennifer, with the guiding hands of her father, Bob, used the resources at The Manufactory to build a scale model of the solar system which is now on permanent display at her Alma Mater, Fairfield … Continued

Skull Sessions

posted in: News | 0

Want an opportunity to meet other makers, make new friends, bounce ideas around? Come to a Skull Session at The Manufactory. The Manufactory hosts a continuing series of meetings open to members and non-members, so tell your friends and family. … Continued

What’s New

posted in: News | 0

It has been awhile since we have provided an update. As usual a lot of things are going on and the space is getting busier and better every day! Go LIVE! a big success. We had well over a hundred … Continued

Build a Planter Workshop – Free!

posted in: News | 0

We will be holding a special workshop which will demonstrate an example of something that you can build with a Manufactory membership. This project, designed with Mother’s Day in mind, is a planter box that any mother would love. We will … Continued

Open Sundays!

posted in: News | 0

Starting this Sunday, April 27th, we will again be open on Sundays from Noon to 6:00 pm.

Call for presenters

posted in: News | 0

Do you a have a special talent, expertise, product, project or interest? If so, we would like to extend an invitation to you to come and share it with us. We are seeking individuals and groups to do presentations. These … Continued

Dave’s Dashboard

posted in: Projects | 0

Dave, a member/educator, is restoring his 1978 Jeep CJ7. He has already reworked the roll bar some of the fabrication tools including the tubing notcher, tubing bender and the welding equipment. Next on his list was the dashboard. Over the … Continued

What’s New!

posted in: News | 0

We are going LIVE! Beta mode ending As you may know, we have been operating in Beta, or testing mode since opening in January. This period was limited to members that have previous shop experience. The time allowed us the opportunity to learn from our … Continued

Laser Engraver Upgrade

posted in: Projects | 0

Members have told us that one of the difficulties in using the laser engraver is determining exactly where the laser was going to engrave/cut. We did a little research and found that a lot of others that have machines without … Continued